To solve the problem of cutting noise of intelligent cutting equipment, we must first analyze the place where the noise is generated. In this article, we will introduce how to correct it with you in detail.
There are four areas where intelligent cutting equipment generates noise:
1, the sound of air compressor boot adsorption.
2, the sound produced by the vibration of vibrating knives and pneumatic knives.
3, the sound generated by kinetic energy cutting when the blade is in contact with the material.
4, the sound generated when the machine is running
The above four parts are the main places to produce sound, because people working in a high noise environment will cause certain harm to the eardrum, therefore, the sound of the equipment must be controlled within 90 decibels when the equipment is idling. For this reason, we reduce the noise of the sound.
For the sound generated by the air compressor, the air compressor is generally used in the vacuum adsorption system, for which Datu has professionally developed a set of air compressor system to effectively isolate the generation of sound.
There is no good solution to the sound generated by the vibration of the vibrating knife and the pneumatic knife. Datu has prepared a soundproof housing system for the customer, which can effectively isolate about 10% of the sound at present.
The sound generated by the kinetic energy when the blade is in contact with the material cannot be effectively solved at present, and the worn blade can be replaced in time. There are also customers who use round knives and drag knives, which produce less sound, but these two tools have less use for materials.
The sound generated when the machine is running is larger, which has a great relationship with the maintenance of the machine, the machine itself has an oil system, regular maintenance, and the sound generated by the operation can be effectively eliminated.
Post time: Dec-05-2023